Meshes – Reference guide
We produce meshes in the following formats:-
Square, Diamond, Hexagonal, Octagonal & Rectagonal.
The bar width is defined as `fine’, `medium’ or `heavy’ so the narrowest are `fine’, the widest are `heavy’.
The size given is the measurement from centre bar to centre bar, NOT the hole size.
SQUARE MESHES-
FINE: 0.75mm = SLF060. 1mm = SLF077. 1.5mm = SLF078. 2mm = SLF079. 2.5mm = SLF080. 3mm = SLF081.
Micro Mesh: 0.20mm = MINI13. 0.35mm = MINI14. 0.50mm = MINI15.
MEDIUM: 0.75mm = SLF013. 1mm = SLF012*. 1.5mm = SLF085. 2mm = SLF086. 2.5mm = SLF050. 2.5mm = SLF051* 3mm = SLF087. 4mm = SLF088. 5mm = SLF052* 5mm = SLF053. Note meshes marked * are diagonally set on the fret.
HEAVY: 1mm = SLF048. 1.5mm = SLF049. 2mm = SLF089. 3mm = SLF090
DIAMOND MESHES-
FINE: .5mm = SLF108. 1mm = SLF011. 2mm = SLF082. 2.5mm = SLF061. 3mm = SLF083. 4mm = SLF084. Fret SLF014 has 50% of SLF078 + 50% of SLF061.
MICRO MESH: 0.20mm = MINI16 0.35mm = MINI17 0.50mm = MINI18
HEXAGONAL MESH –
MICRO MESH: 0.25mm = MINI19
OCTAGONAL MESHES
FINE: .5mm = SLF109. 1mm = SLF054.
MICRO MESH: 0.25mm = MINI20
RECTAGONAL MESH -Contains 3mm x 5mm & 4mm x 6mm (each 50% of fret) = SLF027.
GEODETIC MESH – 5mm overlapped diamond (For footbridges etc) = SLF015